PRODUCT SPECIFICATIONS
|
|
The patent pending Softwash ProPortioner system allows you to draw from individual tanks of your pure products and proportion them to your individual desired mix. Need a 20% mix on the roof and 5% on the house that’s no problem simply set your mix ratio and when you need to change it turn the valve. Never again will your mix be too strong or too weak, the Softwash ProPortioner will allow you to adjust your mix on the fly. The Softwash ProPortioner works on the inlet side of your pump system and is compatible with 12-volt pumps, air diaphragm pumps, booster pumps and other demand pump systems.
The Softwash ProPortioner systems are built for the long haul. You will never need to buy another unit because of a valve malfunction as the system was |
designed to be fully rebuildable/replaceable if necessary. The water and soap valves have an extremely long lifespan while we recommend the SH (bleach) valve be rebuilt annually for uninterrupted use. Flushing the SH valve is recommended after every use and can be done with ease with the installation of a 3 way valve on the SH intake. Having one side going to SH and the other to water you simply turn the 3 way to water after using and flush system, pump, etc.
For the system to operate you will need a water tank, bleach tank and a soap source, pulling soap out of 1gal jugs or 5 gallon pails will work but larger tanks will allow for less refilling and extended run time. Water and bleach tanks will be plumbed from the top with equal length 1/2" lines. The soap supply can use 1/2", 3/8" or even 1/4" as it is just a drip in the system. All pickups must be filtered to control debris intake. The system will vary slightly from user to user, so individual testing may be required.
For the system to operate you will need a water tank, bleach tank and a soap source, pulling soap out of 1gal jugs or 5 gallon pails will work but larger tanks will allow for less refilling and extended run time. Water and bleach tanks will be plumbed from the top with equal length 1/2" lines. The soap supply can use 1/2", 3/8" or even 1/4" as it is just a drip in the system. All pickups must be filtered to control debris intake. The system will vary slightly from user to user, so individual testing may be required.
Warranty:
Each component that makes up the final assembly has its own individual warranty. The case has a lifetime warranty against manufacture defects. The wearable items such as, valves, check valves, fittings and hinges carry a 90 day warranty against manufacture defects but does not include damage due to wear or chemical damage. The Power Wash Store offers a full one year warranty on all labor associated with the unit, in house only. Simply ship it back and we will do the annual inspection and any repairs free of charge excluding parts or repair kits required.
Each component that makes up the final assembly has its own individual warranty. The case has a lifetime warranty against manufacture defects. The wearable items such as, valves, check valves, fittings and hinges carry a 90 day warranty against manufacture defects but does not include damage due to wear or chemical damage. The Power Wash Store offers a full one year warranty on all labor associated with the unit, in house only. Simply ship it back and we will do the annual inspection and any repairs free of charge excluding parts or repair kits required.